Click here for our main site ETDRacing.com

K-Tuned.com -  TEL: 905-953-9260  -  Open M-F 9-6  -  Hardcore Parts for Hardcore Enthusiasts
 

 
K-Tuned K-Series Swap Traction Bar for 90-93 Integra

- Gen 4 Bars, fully new design to completely eliminate and failures
- Aluminum Swaged radius arms (stronger and better)
- Tig and Mig welded for the best strength
- New double rod end (heim joints) on each end of the radius arm
- Control arm mounting tabs
- Full mounting hardware package included
- Gen 4 bars are stronger all around
- New ultra tough powder coating, the strongest and thickest ever
- New high quality packaging so it gets to you in tip top condition
- All parts are powder coated or zinc plated for durability and long life
- Includes rad mounts so you can mount your radiator anywhere

 


These bars are the strongest ETD makes and the best in the industry.  We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy.  These bars are designed for high hp street and track dedicated cars.

Engineered from extensive track testing and racing, ETD Racing  Traction bars are developed to improve traction and handling. ETD Racing Traction Bars bolts on to your factory tow hook mounting locations.  We don't just sell these bars we use them on our race cars.

Components are CNC machined and laser cut from 1/4" steel and finished with a durable powder coating or zinc plating depending on the part. The radius arms are thick walled polished aluminum to ensure a strong and solid arm to prevent from fatigue and breakage. With the versatility of the radius arms, fitment is perfect every time and adjustability is only a twist away.  The Main bar is made from Chromoly and the end plates from the best high-grade steel available.

Also includes the rad mounts shown above so you can mount your original rad or a smaller 92-95 civic style rad anywhere you want on your rad.  If you're running a large turbo and external wastegate and are hard up for space near the front of the motor this will allow you to move things around where you need.

- Does not interfere with stock rad points.
- Full Bolt on installation
- Perfect for Street cars 
 
Acceptance Mark US Dollars
90-93 Traction Bar

 		 Price: $330
In Stock: In Stock
 
 
 
Features:




 		 4rd Generation Design - All New again.

The first & second and recently thrid generation bars were ground breaking in their design, but with some track testing and further enhancements we have developed this new design based on your feedback.  We sold thousands of the original design, but with racer and street driver input this new product is the result of all your feedback...
 
  Bar is no longer butt welded to the plate.  The mounting plate is drilled and the bar goes through it and welded on the outside.  This added a lot of extra strength and completely eliminated welds breaking.  ETD Racing traction bars are the only bars built like this.

New Shinier and stronger Powder Coating
We no longer use the dull black powder coating we have switched to this deep shiny black powder coating which is thicker and more durable than any coating we have ever used before.






 
  New extra mounting point.  

For extra stability we made an angle bracket that bolts to the end plate and to the under side of the front frame rail.  This new silver zinc coated plate will provide a lot of additional lateral support for the bar.  It bolts to the end plate and uses your stock chassis bolt into the frame rail. 

The reason we made it separate like this is we have found that over the years many cars have shifted enough that bolt holes didn't line up, even by very small amounts when they were welded.  Now with it being bolted at both ends it gives just enough extra movement so that it will line up on every car.


 
  Mounting System, 2 bolts not 1.

- Our new mounting system consists of a bolt for the radius arm to the control arm plus a plate bolt and spacer into the second hold increasing the strength of the radius arm to the control arm.  We don't single mount them to the control arm as one bolt holding it on could break and cause you to lose control of your car.

The double bolting system as you see to the right here shares the load from the car across two bolts making it much much stronger and almost impossible to fail at this point even under heavy loads.



 
  Full Mounting Hardware package included

(1) 2x Swaged 7075-T7 Aluminum Radius arms
(2) 4x 5/8" Chromoly Rod ends and jam nuts
(3) 2x Control Arm Jumper Bracket
(4) 4x Grade 12.9 Chassis Bolts with Washers
(5) 2x Rod End bolts with locking nuts
(6) 2x Control Arm spacers
(7) 4x Control arm nuts with locking washers

 
  Hardware continued...

(1) 2x Chassis mounting brackets
(2) 2x Bolts and washers
(3) Rad Supports











 
  Aluminum Radius Arms & Stronger Rod Ends.

We searched the market for the best radius arms but couldn't find anything that is strong enough.  We had these custom made to our specifications which are the strongest in the industry.  These are now swaged polished 7071-T7 aluminum radius arms that are .150 thick with an 1.125" OD.  7071-T7 is one of the highest grades available and is generally used only in major aerospace use.

We use chromoly & Teflon lined rod ends are 5/8ths thick and are heat treated black. The strongest available for this application based on our exhaustive testing.
 


 
  Rad brackets are included

For your convenience we include the rad brackets so you can mount your rad anywhere.


 
 
 
ETD Racing -  TEL: 905-953-9260  -  Open M-F 9-6  -  Hardcore Parts for Hardcore Enthusiasts