|
These are generic install instructions for our rad
bracket kit. You can install these brackets in a
number of ways however this will cover the most common
way. You can see the bottom
brackets and hardware (left side of pic) which will
install the lower brackets and the larger top bracket
and three nuts/bolts.
The bottom brackets use a nutsert which expands when
they the screws go in to make a tight connection.
There is also provided two aluminum spacers so you can
offset one lower bracket to keep the rad straight.
The rad saddle is not straight across the bottom, so
these spacers will allow you to get the brackets lining
up straight so the rad goes in straight under the hood.
Once you start the install on your own car this will be
readily apparent.
|
